Polyisobutylene Grades Explained: Molecular Weight, Viscosity and Application Selection

November 19, 2026 · Technical

What PIB is

Polyisobutylene (CAS 9003-27-4) is a saturated homopolymer of isobutylene. The fully saturated backbone is the reason for its properties: excellent oxidative and thermal stability, low gas permeability, good dielectric strength, and compatibility with hydrocarbon oils and waxes. It is supplied as a colourless to pale-yellow viscous liquid or as a rubbery solid, depending on molecular weight.

Why molecular weight is the specification

PIB is not characterised by a single number but by a molecular-weight distribution. Suppliers quote a viscosity-average molecular weight (Mv), a Staudinger index (intrinsic viscosity, ml/g), and often a kinematic viscosity at 100 °C or 150 °C. Two products with the same Mv can still differ in viscosity and tack because of distribution and residual monomer. That is why a specification must include the test method, not just the figure.

ClassApprox. MvFormTypical applications
Low~500–3,000Viscous liquid / syrupLubricant additives, two-stroke oils, tackifiers, sealant plasticisers
Medium~5,000–50,000Tacky, soft solidSealants, adhesives, chewing-gum base (food grade), cling film
High~50,000–200,000+Rubbery solidRubber compounding, damping, bitumen modification, cable compounds

Matching grade to application

  • Sealants and adhesives: medium grades give tack and flexibility without too much cold flow. Check compatibility with your plasticiser and filler; PIB is non-polar and does not tolerate polar extenders.
  • Lubricants: low-MW liquid grades act as viscosity-index improvers and smoke suppressants in two-stroke oils. Ask for the volatility (loss at 100 °C) as well as viscosity.
  • Rubber and damping: high-MW grades need mastication and mixing; they are chosen for low permeability and damping rather than tack.
  • Food contact: a food-grade claim is a regulatory statement, not a molecular-weight band. Ask for the grade's compliance declaration for the destination market, plus the COA and a migration or extraction statement where applicable.

What to put on the purchase specification

Mv or Staudinger index with method; viscosity at a stated temperature; colour (APHA or Yellowness Index); volatile matter; ash; water; and for food grade, the applicable regulation and any extraction limits. Add the packaging (steel drum, IBC, or bulk) and the storage temperature range.

Handling and storage

PIB is not classified as dangerous goods in most forms and does not need special ventilation, but high-MW grades are tacky and difficult to clean from equipment. Store away from direct sunlight and strong oxidisers; keep containers closed to avoid contamination. Low-MW liquid grades can be pumped warm if viscosity is high — confirm the maximum temperature with the supplier before heating.

Explore our food-grade PIB and industrial-grade PIB, or read our food-grade PIB buying guide.

Need a Chemical Supplier You Can Trust?

Reply within 12 working hours · COA & MSDS with every shipment

Request a Quote