Aniline 99.90% CAS 62-53-3: Industrial Applications, Handling and Sourcing Guide

October 4, 2026 · Product Guide

Basic information

ItemValue
Product nameAniline
SynonymsAminobenzene, phenylamine, benzenamine
CAS number62-53-3
Molecular formulaC6H7N
Molecular weight93.13 g/mol
AppearanceColorless to pale yellow oily liquid; darkens on exposure to light and air
Assay / Purity99.90% min (typical commercial grade)
SolubilitySlightly soluble in water (approx. 3.4 g/100 mL at 20 °C); miscible with ethanol, ether, benzene, and most organic solvents
Packaging200 kg/drum (lacquered steel or galvanized), ISO tanks, tank trucks
HS code2921.41
StorageCool, dry, well-ventilated area; protect from light; keep away from oxidizers and acids; nitrogen blanketing recommended
Main usesPrecursor to methylene diphenyl diisocyanate (MDI), rubber chemicals, dyes, pharmaceuticals, agrochemicals
Boiling point184 °C
Flash point70 °C (closed cup)

1. Overview

Aniline (CAS 62-53-3) is a primary aromatic amine that appears as a colorless to pale yellow oily liquid with a characteristic amine odor. It is one of the most important commodity intermediates in the chemical industry, with a global production scale exceeding several million tonnes per year. The 99.90% assay grade supplied in 200 kg drums is suited to downstream syntheses that demand low moisture and minimal organic impurities. Its reactivity stems from the amino group attached directly to the benzene ring, which participates in a wide range of transformations.

As a building block, aniline is indispensable for polyurethane production, rubber chemicals, azo dyes, and pharmaceuticals. It also serves as a solvent and intermediate in fine chemical manufacturing. Because of its toxicity and tendency to darken upon exposure to light and air, careful storage and handling are essential. Buyers typically select this grade for consistent color, low water content, and reliable supply in standard packaging.

2. Manufacturing and supply

Aniline is produced industrially almost exclusively by the catalytic hydrogenation of nitrobenzene in the vapor or liquid phase, using copper or noble-metal catalysts. The crude product is purified by distillation to reach purities of 99.90% or higher, with tight control of water, nitrobenzene, and other impurities. Alternative routes such as the ammonolysis of phenol or reduction of nitrobenzene with iron or zinc are less common today. The finished product is supplied in 200 kg lacquered steel drums, ISO tanks, or road tankers. A nitrogen blanket is often applied to prevent oxidation and color degradation during storage and transport.

3. How it works

  • Nucleophilic amino group: The nitrogen lone pair makes aniline a nucleophile and a weak base (pKa of conjugate acid approx. 4.6), enabling reactions with electrophiles such as acid chlorides, anhydrides, and alkyl halides.
  • Electrophilic aromatic substitution: The amino group is a strong activating and ortho/para-directing substituent, so aniline readily undergoes halogenation, nitration (after protection), sulfonation, and Friedel-Crafts-type reactions.
  • Diazotization: Treatment with nitrous acid generates a diazonium salt, a key intermediate for azo coupling reactions that produce dyes and pigments.
  • Hydrogen bonding and solvency: The amino group forms hydrogen bonds with polar molecules, giving aniline moderate solvency for resins, dyes, and some polymers, though it is not a true solvent for all systems.
  • Oxidation sensitivity: Aniline oxidizes on exposure to light and air, forming colored impurities; hence antioxidants or nitrogen blanketing are used to maintain quality.

4. Application areas in detail

4.1 Polyurethane and MDI production

The largest single use of aniline is as a precursor to MDI (methylene diphenyl diisocyanate). Aniline is condensed with formaldehyde to form methylene dianiline (MDA), which is then phosgenated to MDI. MDI is a core building block for polyurethane products including flexible slabstock foams for mattresses and furniture, rigid insulation panels for construction, thermoplastic polyurethanes (TPU) for footwear and cables, and adhesives and coatings for automotive and industrial applications.

4.2 Rubber chemicals

Aniline is a starting material for several rubber chemicals, including antioxidants and antiozonants such as 6PPD and IPPD (N-isopropyl-N'-phenyl-p-phenylenediamine). These additives protect rubber from degradation by oxygen, ozone, and heat. Downstream products include tires, hoses, belts, gaskets, and seals used in automotive, industrial, and mining equipment. Aniline-derived accelerators also play a role in vulcanization chemistry.

4.3 Dyes and pigments

Through diazotization and azo coupling, aniline yields a broad family of azo dyes. These colorants are used in textiles (cotton, wool, silk), leather, paper, inks, and plastics. Specific end uses include direct dyes for cellulosic fibers, acid dyes for nylon and wool, and disperse dyes for polyester. Aniline also serves as an intermediate for pigment production, such as certain yellow and red organic pigments.

4.4 Pharmaceuticals and agrochemicals

Aniline is a key intermediate in the synthesis of pharmaceuticals such as paracetamol (acetaminophen) and sulfa drugs. It is also used to manufacture agrochemicals including herbicides, fungicides, and insecticides. For example, aniline derivatives are found in chloroacetanilide herbicides and phenylurea fungicides. These products support crop protection and human healthcare.

4.5 Fine chemicals and intermediates

In fine chemical production, aniline is converted into substituted anilines, anilides, and diphenylamine derivatives. These intermediates are used in photographic chemicals, antioxidants for polymers, stabilizers for fuels and lubricants, optical brighteners, and resin curing agents. Aniline also appears in corrosion inhibitors and petroleum additives, where its nitrogen functionality improves performance.

4.6 Other applications

Aniline is used as a solvent in specialty formulations and as a chemical intermediate for explosives stabilizers, although this is a minor use. It also serves in the production of isocyanates other than MDI, such as phenyl isocyanate, and in laboratory reagents. Because of its toxicity, most large-scale uses are captive or tightly controlled.

5. Comparison with alternatives

AlternativeKey differencePractical implication
NitrobenzeneNot an amine; must be reduced before useRequires an extra hydrogenation step; not a direct substitute
m-ToluidineMethyl-substituted aniline; different reactivityChanges dye shade and rubber chemical performance
N-MethylanilineSecondary amine; no N-H bondAlters reaction pathways and product properties
o-ToluidineOrtho-substituted isomer; higher steric hindranceDifferent isomer ratios in downstream products
CyclohexylamineAliphatic amine; no aromatic ringDifferent solvency and reactivity; not for azo dyes
BenzylamineAliphatic amine with benzyl groupDifferent end-use profile; not an MDI precursor
p-PhenylenediamineDiamine; two amino groupsUsed in rubber chemicals and dyes but different stoichiometry

Aniline is the preferred choice when an aromatic primary amine with high purity and consistent reactivity is required for MDI, azo dyes, or rubber chemicals. Alternatives may be considered for specific substitution patterns or when a non-aromatic amine is acceptable.

6. Handling, storage and compliance

Store aniline in a cool, dry, well-ventilated area away from oxidizers, acids, and ignition sources. Protect from light and keep containers tightly closed; nitrogen blanketing is recommended for long-term storage. Use PPE including nitrile gloves, chemical goggles, face shields, and impervious clothing. Respiratory protection is required if ventilation is inadequate. Aniline is classified as toxic and a suspected carcinogen in some jurisdictions; consult the safety data sheet (SDS) for specific regulatory classifications. For transport, it is typically assigned UN 1547, Class 6.1, Packing Group II. Compliance with REACH, TSCA, and local chemical control laws is mandatory.

FAQ

Q1. What is the CAS number for aniline? The CAS number is 62-53-3.

Q2. What is the typical assay of industrial aniline? Commercial aniline is typically supplied at 99.90% minimum assay, with low moisture and controlled color.

Q3. What is aniline used for? The largest use is as a precursor to MDI for polyurethane. It is also used in rubber chemicals, azo dyes, pharmaceuticals, and agrochemicals.

Q4. How is aniline packaged and shipped? Standard packaging is 200 kg/drum, but it can also be supplied in ISO tanks and road tankers for bulk volumes.

Q5. What are the main safety concerns with aniline? Aniline is toxic if inhaled, swallowed, or absorbed through the skin. It can cause methemoglobinemia and is considered a suspected carcinogen. Use proper PPE and engineering controls.

Q6. How should aniline be stored? Store in a cool, dry, dark place away from oxidizers and acids. Use nitrogen blanketing and keep containers closed to prevent oxidation and moisture ingress.

Q7. What is the HS code for aniline? The HS code is 2921.41.

Q8. Can aniline be used as a solvent? Yes, aniline has some solvency for resins and dyes, but its primary role is as a chemical intermediate. Its toxicity limits solvent applications.

Need a Chemical Supplier You Can Trust?

Reply within 12 working hours · COA & MSDS with every shipment

Request a Quote